Home › Products › SKF Super-Precision Bearings

SKF Super-Precision Bearings for CNC Spindles

← Back to Product Catalog

Cantoni Cuscinetti S.r.l. — Authorized SKF Super-Precision Distributor

Specialized technical supply from our Brescia warehouse with full SKF traceability, expert support for universally matchable sets (DG, TBT, QBC), axial preload selection, and complete CNC spindle rebuild kits.

SKF Super-Precision Spindle Bearing Engineering

Machine tool spindle bearings must simultaneously deliver sub-micron rotational accuracy (P4A / PA9A / SP), exceptional radial and axial stiffness, minimal heat generation, and ultra-high peripheral speeds exceeding 2 million mm·min-1 speed factor.

According to the SKF Super-Precision Bearings Technical Catalog (Pub. 13383/2 EN), CNC spindle assemblies typically pair angular contact ball bearings (719, 70, 718, 72 and sealed S719, S70 series) at the spindle nose with 1:12 tapered-bore cylindrical roller bearings (NN 30 K/SP, N 10 KPHA/SP, NNU 49 BK/SPW33) or floating ball pairs at the rear support.

Technical Specifications & Operating Parameters

Angular Contact Ball Series
ISO 19 (719) · ISO 10 (70) · ISO 18 (718) · ISO 02 (72) · S719 / S70
Cylindrical Roller Series
NN 30 K (1:12) · N 10 K · NNU 49 BK / B · SP / UP Precision
Tolerance Classes
ISO P4A · P4 · PA9A (ABEC 9) · SP · UP
Contact Angles
15° (C) · 18° (F) · 25° (AC)
Rolling Elements
100Cr6 Steel · NitroMax · Si3N4 Ceramic Hybrid (HC / HCN)
Preloads & Matched Sets
A · B · C · D · G / Arrangements DG · DB · DF · DT · TBT · QBC

SKF Super-Precision Designation System: How to Read the Code

Every SKF Super-Precision designation systematically encodes sealing execution, ISO dimension series, contact angle, internal geometry, ball material, tolerance grade, and matched-set preload (ref. SKF Super-Precision Catalog PDF). Breakdown of a full CNC electrospindle part number:

Example 1 — Sealed matched angular contact ball pair: S7016 ACE/HCP4ADGA
S 7016 ACE / HC P4A DG A
S (Seal Prefix) Factory-sealed with integral non-contact seals and lifetime grease fill. Omitted = open execution. (V = NitroMax nitrogen-alloyed steel).
7016 (Series + Bore) 70 = ISO 10 series; 16 × 5 = d = 80 mm. Other series: 718 (ISO 18), 719 (ISO 19), 72 (ISO 02).
ACE (Design & Angle) High-speed E design with 25° contact angle (CE = 15°; CD/ACD = high-capacity D design; CB/ACB = ultra-speed B design).
/HC (Rolling Elements) Hybrid bearing with silicon nitride Si3N4 ceramic balls (−60% mass, +50% elastic modulus). Omitted = 100Cr6 bearing steel.
P4A (SKF Tolerance) ISO Class 4 (ABEC 7) dimensional accuracy with ISO Class 2 (ABEC 9) running accuracy/runout.
DGA (Set & Preload) DG = pair of 2 universally matchable bearings for DB/DF/DT; A = light axial preload (B medium, C heavy, D extra-heavy).

Special SKF Suffixes on Rollers & Ball Bearings: Tapered Bore K, Direct Feed Holes H/L & Surface Coatings

On spindle cylindrical roller bearings (e.g., N 1012 KPHA/HC5SP or NN 3016 KTN/SP), K identifies a 1:12 tapered bore for axial clearance adjustment, PHA marks a glass-fiber reinforced PEEK cage (or TNHA PA46, TN/TN9 PA66), HC5 grade 5 Si3N4 ceramic rollers, and SP/UP super/ultra precision tolerances. Angular contact ball bearings for direct oil-air injection carry H / H1 / L / L1 (outer-ring feed holes and O-ring grooves), while specialized SKF surface treatments include L5DA (NoWear DLC) and L4B (black oxide).

SKF Bearing Series (ISO 19 / 10 / 18 / 02 & Spindle Cylindrical Rollers)

Dimension series selection governs maximum allowable spindle shaft diameter (bending stiffness), dynamic load capacity, and thermal stability at high rpm.

Series 719 (S719) ISO 19 · Thin
High Speed & Large Shaft Diameters

Compact cross-section maximizes spindle shaft bore inside a fixed housing OD, raising natural shaft frequency and maximum rpm on HSC electrospindles and grinders. Available open (719..) and sealed (S719..).

Series 70 (S70) ISO 10 · CNC Standard
Balanced Stiffness, Load & Speed

The benchmark series for vertical and horizontal CNC machining centers (ISO 40 / BT40 / HSK-A63). Larger balls than 719 provide higher shock tolerance and combined thrust capacity. Available open (70..) and sealed (S70..).

Series 718 ISO 18 · Ultra-Thin
Extreme Space Constraints & 5-Axis Heads

Minimum standardized ISO 18 cross-section (CD/P4, ACD/P4, and hybrid /HCP4). Essential for 5-axis bi-rotary milling heads, driven live toolholders, precision robotics, and hollow-shaft spindles.

Series 72 ISO 02 · Medium-Heavy
Maximum Static & Roughing Capacity

Heavy section built for CNC lathes, boring mills, and medium-speed heavy stock-removal spindles — delivering the highest dynamic load rating Cr, moment resistance, and shock toughness across SKF spindle ball bearings.

NN 30 K/SP · KTN 2-Row Rollers
Maximum Radial Stiffness with 1:12 Tapered Bore

Double-row cylindrical rollers with separable flangeless outer ring. The 1:12 K tapered bore enables micrometer-fine mounted clearance or preload adjustment at the spindle nose or lathe tail end (W33 groove & holes standard from d=140 mm).

N 10 KPHA/SP · NNU 49 1 & 2-Row Rollers
High-Speed Non-Locating Support & ISO 49

N 10.. KPHA/SP (single row with PEEK PHA or PA46 TNHA cage, optional ceramic HC5SP) absorbs shaft thermal expansion inside fast motorized spindles. NNU 49 BK/SPW33 packs ultra-compact double-row support onto large-diameter spindles.

1:12 Tapered Bore (K) Setting on SKF Cylindrical Roller Spindle Bearings

On NN 30 K, N 10 K, and NNU 49 BK bearings, driving the 1:12 tapered inner ring further up the spindle journal radially expands the inner raceway, setting mounted clearance or preload using precision locknuts (e.g., SKF KMT). Including shaft elastic compliance, roughly 15 μm of axial drive-up closes radial clearance by 1 μm; for high-speed spindles (above 750,000 mm·min-1), SKF specifies verifying a small cold residual radial clearance of +2 to +4 μm with SKF GB 30 / GB 10 internal clearance gauges to offset centrifugal and thermal expansion at speed.

Contact Angles (15° C · 18° F · 25° AC) & Ceramic Hybrids (HC)

Nominal contact angle and ball-size series determine the balance between radial stiffness, axial thrust strength, and high-rpm thermal behavior.

SKF Suffix Angle α Internal Architecture Radial / Axial Ratio Typical CNC Spindle Use
CD 15° D Design — High load capacity ≈ 6.0× High radial loads, finish milling and precision turning, good speed capability
ACD 25° D Design — High load capacity ≈ 2.0× Heavy axial thrust, heavy drilling, plunge milling, doubled axial stiffness
CE / FE 15° / 18° E Design — Smaller high-speed balls ≈ 6.0× / 4.2× Ultra-high-speed HSC electrospindles, minimal centrifugal spin skid
ACE 25° E Design — High speed + thrust ≈ 2.0× High-speed motorized spindles facing strong axial cutting forces or tandem sets
CB / ACB 15° / 25° B Design — Ultra-high speed ≈ 6.0× / 2.0× Internal grinding spindles and continuous micro-machining at maximum rpm
/HC · /HC5 Silicon Nitride
Si3N4 Ceramic Hybrid Balls & Rollers

At 3.20 g/cm³ (−60% weight vs steel), ceramic elements slash centrifugal stress, boost elastic modulus to 315 GPa (+10–18% higher spindle stiffness), cut thermal expansion by 74%, and naturally insulate against VFD inverter currents.

V · L5DA · L4B Steels & Coatings
NitroMax, NoWear DLC & Black Oxide

NitroMax (V): PESR nitrogen-alloyed stainless steel with superior corrosion and fatigue resistance. NoWear (L5DA): low-friction DLC coating for marginal lubrication. Black Oxide (L4B): Fe3O4 layer combating WEC and smearing.

PHA · TNHA · TN9 SKF Cages
Phenolic Resin, PEEK & Polyamides

Angular contact ball bearings use lightweight outer-ring-guided phenolic resin cages as standard. Cylindrical roller bearings N 10 and NN 30 run high-speed PEEK PHA, high-temp PA46 TNHA, or PA66 TN / TN9 cages.

Matched Arrangements (DB · DF · DT · TBT · QBC) & Preload Classes

SKF DG universally matchable bearings are precision face-ground to calibrated standouts so any two or more bearings mount in any arrangement (Back-to-Back, Face-to-Face, or Tandem) without custom spacers.

SKF Arrangement Symbol Relative Axial Stiffness Speed Reduction Factor Characteristics & Use
DB (Back-to-back, 2 pcs) < > 1.00× (pair baseline) 0.80 Diverging load lines: maximum overturning moment stiffness and bidirectional thrust control
DF (Face-to-face, 2 pcs) > < 1.00× 0.80 Converging load lines: tolerates slight housing misalignment, narrower moment spread than DB
DT (Tandem, 2 pcs) << 2.00× (one direction) 0.85 Shares unidirectional axial load across two rows; always preloaded against an opposing bearing
TBT / TFT (Triple set) << > 1.45× (2-bearing side) 0.65 ÷ 0.70 2 tandem bearings opposed by 3rd bearing for heavy primary directional cutting thrust
QBC / QFC / QBT (Quadruple set) << >> 2.00× / 1.65× 0.60 ÷ 0.65 Maximum global stiffness for heavy CNC milling spindles and high-torque long shafts

Axial Preloads, ISO Tolerances & Spindle Lubrication

Over 70% of premature CNC spindle bearing failures stem from mismatched preload/set selection, over-greasing, or skipping the initial grease distribution run-in cycle.

GA · GB · GC / DG Preload & Tolerances
Axial Preload (A · B · C) & P4A / PA9A / SP Precision

Light preload A for highest HSC electrospindle rpm, medium B for universal CNC machining centers, heavy C for roughing cuts, plus extra-heavy D or calibrated G.. grades. Tolerances P4A, PA9A (ABEC 9), and SP/UP for rollers.

S719 · S70 Grease-for-Life
Ready-to-Mount Sealed Executions

Cleanroom pre-lubricated with high-performance SKF spindle grease and integral non-contact seals. Shields the spindle from coolant, chips, and shop-floor over-greasing errors — also available in high-speed /HC ceramic hybrids.

H · H1 · L · L1 Oil-Air & Run-In
Oil-Air Lubrication & Stepped Run-In

Direct outer-ring feed holes and O-ring grooves H / L for continuous oil-air lubricated electrospindles. For manually greased open bearings, always perform a stepped-speed run-in procedure before full production rpm.

Frequently Asked Questions (CNC Spindles & SKF Replacements)

1. What is the difference between SKF 15° (CD / CE) and 25° (ACD / ACE) spindle bearings?

A 15° contact angle (CD and CE suffixes) prioritizes radial stiffness and keeps operating temperatures low, making it the first choice for high-speed milling, HSC electrospindles, and grinding spindles. A 25° contact angle (ACD and ACE) carries much higher axial thrust forces in CNC lathes, heavy drilling, and universal machining centers. High-speed CE and ACE versions use smaller, more numerous balls to reach higher rpm than matching CD / ACD bearings.

2. When should I choose SKF ceramic hybrid bearings (/HC) over standard all-steel bearings?

Ceramic hybrid bearings (/HC on ball bearings and /HC5 on roller bearings) use silicon nitride balls that weigh far less than bearing steel: this reduces centrifugal force on the outer raceway, minimizes high-rpm temperature rise, raises limiting speed, and extends grease life. Ceramic hybrids also increase spindle nose rigidity during precision finishing and provide built-in electrical insulation against inverter shaft currents.

3. What do SKF arrangement codes DG, DB, DF, TBT and preload classes A, B, C mean?

Universal matchable SKF bearings (DG pairs or single GA / GB / GC) are precision-ground on side faces to drop straight into any arrangement without custom shims: back-to-back (DB, highest overturning stiffness), face-to-face (DF), or tandem (DT). Heavy directional cutting loads use triple sets (TBT) or quadruple sets (QBC). The trailing letter defines axial preload: A light (highest speed), B medium (universal CNC duty), and C heavy (maximum roughing stiffness).

4. Why do CNC spindles use SKF NN 30 K/SP and N 10 KPHA/SP cylindrical roller bearings?

Super-precision NN 30 K/SP (double row) and N 10 KPHA/SP (single-row high-speed) cylindrical roller bearings deliver extreme radial stiffness at the spindle nose or function as non-locating rear supports absorbing shaft thermal growth. The K suffix denotes a 1:12 tapered bore allowing spindle technicians to dial in exact mounted radial clearance using precision locknuts (such as the SKF KMT series).

5. Should I use sealed grease bearings (S719 / S70) or open oil-air spindle bearings?

Factory-sealed S719.. and S70.. bearings arrive pre-greased under cleanroom control and protected by integral non-contact seals against chips and coolant, speeding up spindle rebuilds and avoiding shop-floor grease dosing errors. For ultra-high-speed motorized spindles or heavy continuous cycles, open bearings fed by oil mist or oil-air (including direct outer-ring feed holes H / H1 / L / L1) remain the standard solution.

Dimension & Performance Chart — SKF Super-Precision (107 References)

Verified technical data from the SKF Super-Precision Bearings Catalog (Pub. 13383/2 EN) covering 107 core CNC spindle executions. Principal dimensions d, D, B in millimeters; basic dynamic Cr and static C0r load ratings in kN; attainable speeds for grease and oil-air lubrication in rpm.

107 items displayed
Official SKF Designation Series & Execution d (mm) D (mm) B (mm) Cr (kN) C0r (kN) Grease / Oil Speed (rpm) Weight (kg)
71900 ACE/P4A Angular ball ISO 19 · 25° high-speed E · 100Cr6 Steel (P4A) 10 22 6 1.95 0.78 93,000 / 140,000 0.009
71900 CE/HCP4A Angular ball ISO 19 · 15° high-speed E · Hybrid Si3N4 (P4A) 10 22 6 2.03 0.815 123,000 / 185,000 0.008
71901 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 12 24 6 2.65 1.25 63,000 / 95,000 0.01
71901 ACD/P4A Angular ball ISO 19 · 25° high-cap D · 100Cr6 Steel (P4A) 12 24 6 2.55 1.18 56,000 / 85,000 0.01
71902 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 15 28 7 3.97 1.9 56,000 / 85,000 0.015
71902 CE/HCP4A Angular ball ISO 19 · 15° high-speed E · Hybrid Si3N4 (P4A) 15 28 7 3.19 1.4 90,000 / 140,000 0.013
71903 ACD/P4A Angular ball ISO 19 · 25° high-cap D · 100Cr6 Steel (P4A) 17 30 7 3.97 2 45,000 / 67,000 0.017
71903 ACE/HCP4A Angular ball ISO 19 · 25° high-speed E · Hybrid Si3N4 (P4A) 17 30 7 3.19 1.46 75,000 / 115,000 0.014
71904 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 20 37 9 6.05 3.2 43,000 / 63,000 0.035
71904 ACD/P4A Angular ball ISO 19 · 25° high-cap D · 100Cr6 Steel (P4A) 20 37 9 5.72 3.05 38,000 / 56,000 0.035
71904 CE/HCP4A Angular ball ISO 19 · 15° high-speed E · Hybrid Si3N4 (P4A) 20 37 9 4.88 2.4 68,000 / 106,000 0.032
71905 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 25 42 9 6.76 4 36,000 / 53,000 0.042
71905 ACD/P4A Angular ball ISO 19 · 25° high-cap D · 100Cr6 Steel (P4A) 25 42 9 6.37 3.8 32,000 / 48,000 0.042
71906 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 30 47 9 7.15 4.55 30,000 / 45,000 0.048
71906 CE/HCP4A Angular ball ISO 19 · 15° high-speed E · Hybrid Si3N4 (P4A) 30 47 9 5.59 3.25 49,000 / 75,000 0.045
71906 ACE/P4A Angular ball ISO 19 · 25° high-speed E · 100Cr6 Steel (P4A) 30 47 9 5.27 3.1 37,000 / 58,000 0.05
71908 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 40 62 12 12.4 8.5 20,000 / 34,000 0.11
71908 ACD/P4A Angular ball ISO 19 · 25° high-cap D · 100Cr6 Steel (P4A) 40 62 12 11.7 8 18,000 / 30,000 0.11
71908 CE/HCP4A Angular ball ISO 19 · 15° high-speed E · Hybrid Si3N4 (P4A) 40 62 12 9.75 6.1 38,000 / 58,000 0.088
71910 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 50 72 12 13.5 10.4 17,000 / 28,000 0.13
71910 ACD/P4A Angular ball ISO 19 · 25° high-cap D · 100Cr6 Steel (P4A) 50 72 12 12.7 9.8 16,000 / 26,000 0.13
71910 CE/HCP4A Angular ball ISO 19 · 15° high-speed E · Hybrid Si3N4 (P4A) 50 72 12 12.7 8.65 32,000 / 48,000 0.11
71912 CB/P4A Angular ball ISO 19 · 15° ultra-speed B · 100Cr6 Steel (P4A) 60 85 13 10.4 8.8 22,000 / 32,000 0.2
71914 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 70 100 16 34.5 34 13,000 / 20,000 0.33
71914 ACD/P4A Angular ball ISO 19 · 25° high-cap D · 100Cr6 Steel (P4A) 70 100 16 32.5 32.5 11,000 / 18,000 0.33
71914 CE/HCP4A Angular ball ISO 19 · 15° high-speed E · Hybrid Si3N4 (P4A) 70 100 16 22.1 16.3 22,000 / 34,000 0.27
71916 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 80 110 16 36.4 39 11,000 / 18,000 0.37
71916 ACD/HCP4A Angular ball ISO 19 · 25° high-cap D · Hybrid Si3N4 (P4A) 80 110 16 34.5 36.5 12,000 / 19,000 0.32
71922 CE/HCP4A Angular ball ISO 19 · 15° high-speed E · Hybrid Si3N4 (P4A) 110 150 20 39.7 34.5 14,000 / 22,000 0.7
71924 ACB/P4A Angular ball ISO 19 · 25° ultra-speed B · 100Cr6 Steel (P4A) 120 165 22 25.5 28.5 9,000 / 14,000 1.25
71930 CD/P4A Angular ball ISO 19 · 15° high-cap D · 100Cr6 Steel (P4A) 150 210 28 125 146 6,300 / 9,500 2.55
71930 ACD/HCP4A Angular ball ISO 19 · 25° high-cap D · Hybrid Si3N4 (P4A) 150 210 28 119 140 6,700 / 10,000 2.05
7002 CE/P4A Angular ball ISO 10 · 15° high-speed E · 100Cr6 Steel (P4A) 15 32 9 4.42 1.93 68,000 / 106,000 0.028
7002 CE/HCP4A Angular ball ISO 10 · 15° high-speed E · Hybrid Si3N4 (P4A) 15 32 9 4.42 1.93 83,000 / 127,000 0.025
7002 ACE/P4A Angular ball ISO 10 · 25° high-speed E · 100Cr6 Steel (P4A) 15 32 9 4.23 1.83 63,000 / 95,000 0.028
7003 CD/P4A Angular ball ISO 10 · 15° high-cap D · 100Cr6 Steel (P4A) 17 35 10 6.76 3.25 50,000 / 75,000 0.038
7003 ACD/P4A Angular ball ISO 10 · 25° high-cap D · 100Cr6 Steel (P4A) 17 35 10 6.5 3.1 45,000 / 70,000 0.038
7004 CD/P4A Angular ball ISO 10 · 15° high-cap D · 100Cr6 Steel (P4A) 20 42 12 8.71 4.3 43,000 / 63,000 0.068
7004 ACD/P4A Angular ball ISO 10 · 25° high-cap D · 100Cr6 Steel (P4A) 20 42 12 8.32 4.15 38,000 / 60,000 0.068
7004 CE/HCP4A Angular ball ISO 10 · 15° high-speed E · Hybrid Si3N4 (P4A) 20 42 12 7.41 3.35 65,000 / 100,000 0.056
7005 CD/P4A Angular ball ISO 10 · 15° high-cap D · 100Cr6 Steel (P4A) 25 47 12 9.56 5.2 36,000 / 56,000 0.079
7005 ACD/P4A Angular ball ISO 10 · 25° high-cap D · 100Cr6 Steel (P4A) 25 47 12 9.23 5 34,000 / 50,000 0.079
7006 CD/P4A Angular ball ISO 10 · 15° high-cap D · 100Cr6 Steel (P4A) 30 55 13 14.3 8 32,000 / 48,000 0.11
7006 ACD/P4A Angular ball ISO 10 · 25° high-cap D · 100Cr6 Steel (P4A) 30 55 13 13.8 7.65 28,000 / 43,000 0.11
7006 CE/HCP4A Angular ball ISO 10 · 15° high-speed E · Hybrid Si3N4 (P4A) 30 55 13 9.36 5.2 47,000 / 73,000 0.1
7007 CD/P4A Angular ball ISO 10 · 15° high-cap D · 100Cr6 Steel (P4A) 35 62 14 15.6 9.5 24,000 / 36,000 0.15
7007 ACD/P4A Angular ball ISO 10 · 25° high-cap D · 100Cr6 Steel (P4A) 35 62 14 14.8 9 20,000 / 32,000 0.15
7008 CE/HCP4A Angular ball ISO 10 · 15° high-speed E · Hybrid Si3N4 (P4A) 40 68 15 12.4 7.65 36,000 / 56,000 0.17
7008 ACE/P4A Angular ball ISO 10 · 25° high-speed E · 100Cr6 Steel (P4A) 40 68 15 11.7 7.2 27,000 / 41,000 0.19
7009 CB/P4A Angular ball ISO 10 · 15° ultra-speed B · 100Cr6 Steel (P4A) 45 75 16 9.56 7.2 26,000 / 40,000 0.26
7013 CD/P4A Angular ball ISO 10 · 15° high-cap D · 100Cr6 Steel (P4A) 65 100 18 41.6 37.5 14,000 / 22,000 0.43
7013 ACD/P4A Angular ball ISO 10 · 25° high-cap D · 100Cr6 Steel (P4A) 65 100 18 39 35.5 12,000 / 19,000 0.43
7014 CD/P4A Angular ball ISO 10 · 15° high-cap D · 100Cr6 Steel (P4A) 70 110 20 52 45.5 12,000 / 19,000 0.6
7014 CE/HCP4A Angular ball ISO 10 · 15° high-speed E · Hybrid Si3N4 (P4A) 70 110 20 23.8 18.3 20,500 / 32,000 0.56
7016 ACB/HCP4A Angular ball ISO 10 · 25° ultra-speed B · Hybrid Si3N4 (P4A) 80 125 22 25.1 21.6 15,000 / 22,000 0.86
7021 ACD/P4A Angular ball ISO 10 · 25° high-cap D · 100Cr6 Steel (P4A) 105 160 26 90.4 93 7,500 / 12,000 1.6
7028 CD/P4A Angular ball ISO 10 · 15° high-cap D · 100Cr6 Steel (P4A) 140 210 33 153 166 6,700 / 10,000 3.4
71800 CD/P4 Angular ball ISO 18 · 15° high-cap D · 100Cr6 Steel (P4) 10 19 5 1.9 0.98 80,000 / 120,000 0.005
71800 ACD/HCP4 Angular ball ISO 18 · 25° high-cap D · Hybrid Si3N4 (P4) 10 19 5 1.78 0.93 85,000 / 130,000 0.005
71802 CD/P4 Angular ball ISO 18 · 15° high-cap D · 100Cr6 Steel (P4) 15 24 5 2.29 1.5 60,000 / 90,000 0.007
71804 CD/P4 Angular ball ISO 18 · 15° high-cap D · 100Cr6 Steel (P4) 20 32 7 3.9 2.65 45,000 / 70,000 0.018
71804 ACD/HCP4 Angular ball ISO 18 · 25° high-cap D · Hybrid Si3N4 (P4) 20 32 7 3.64 2.5 48,000 / 75,000 0.017
71806 CD/P4 Angular ball ISO 18 · 15° high-cap D · 100Cr6 Steel (P4) 30 42 7 4.42 3.75 32,000 / 50,000 0.026
71806 ACD/P4 Angular ball ISO 18 · 25° high-cap D · 100Cr6 Steel (P4) 30 42 7 4.16 3.55 28,000 / 45,000 0.026
71808 CD/P4 Angular ball ISO 18 · 15° high-cap D · 100Cr6 Steel (P4) 40 52 7 4.88 4.9 26,000 / 38,000 0.031
71808 ACD/HCP4 Angular ball ISO 18 · 25° high-cap D · Hybrid Si3N4 (P4) 40 52 7 4.49 4.55 28,000 / 43,000 0.029
71810 CD/P4 Angular ball ISO 18 · 15° high-cap D · 100Cr6 Steel (P4) 50 65 7 7.41 7.8 20,000 / 30,000 0.051
71812 CD/HCP4 Angular ball ISO 18 · 15° high-cap D · Hybrid Si3N4 (P4) 60 78 10 13.5 14.3 19,000 / 30,000 0.088
71814 CD/P4 Angular ball ISO 18 · 15° high-cap D · 100Cr6 Steel (P4) 70 90 10 13.8 16 14,000 / 22,000 0.13
71816 ACD/HCP4 Angular ball ISO 18 · 25° high-cap D · Hybrid Si3N4 (P4) 80 100 10 13.8 17 13,000 / 20,000 0.14
71820 CD/P4 Angular ball ISO 18 · 15° high-cap D · 100Cr6 Steel (P4) 100 125 13 22.5 29 9,000 / 14,000 0.31
71820 ACD/HCP4 Angular ball ISO 18 · 25° high-cap D · Hybrid Si3N4 (P4) 100 125 13 21.2 27.5 10,000 / 15,000 0.28
7204 CD/P4A Angular ball ISO 02 · 15° high-cap D · 100Cr6 Steel (P4A) 20 47 14 11.9 5.85 36,000 / 53,000 0.1
7204 ACD/HCP4A Angular ball ISO 02 · 25° high-cap D · Hybrid Si3N4 (P4A) 20 47 14 11.4 5.6 38,000 / 56,000 0.09
7205 CD/P4A Angular ball ISO 02 · 15° high-cap D · 100Cr6 Steel (P4A) 25 52 15 13.5 7.2 30,000 / 45,000 0.13
7205 ACD/P4A Angular ball ISO 02 · 25° high-cap D · 100Cr6 Steel (P4A) 25 52 15 13 6.95 26,000 / 40,000 0.13
7206 CD/P4A Angular ball ISO 02 · 15° high-cap D · 100Cr6 Steel (P4A) 30 62 16 24.2 16 24,000 / 38,000 0.2
7206 ACD/HCP4A Angular ball ISO 02 · 25° high-cap D · Hybrid Si3N4 (P4A) 30 62 16 23.4 15.3 26,000 / 40,000 0.17
7213 CD/P4A Angular ball ISO 02 · 15° high-cap D · 100Cr6 Steel (P4A) 65 120 23 66.3 53 12,000 / 19,000 1.05
7213 ACD/P4A Angular ball ISO 02 · 25° high-cap D · 100Cr6 Steel (P4A) 65 120 23 63.7 51 10,000 / 17,000 1.05
7221 CD/P4A Angular ball ISO 02 · 15° high-cap D · 100Cr6 Steel (P4A) 105 190 36 172 153 7,500 / 12,000 3.85
7221 ACD/HCP4A Angular ball ISO 02 · 25° high-cap D · Hybrid Si3N4 (P4A) 105 190 36 163 146 7,500 / 12,000 3.15
NN 3005 K/SP 2-row cyl. roller, 1:12 tapered bore · Brass Cage (SP) 25 47 16 26 30 19,000 / 22,000 0.12
NN 3006 KTN/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN (SP) 30 55 19 30.8 37.5 17,000 / 19,000 0.19
NN 3007 K/SP 2-row cyl. roller, 1:12 tapered bore · Brass Cage (SP) 35 62 20 39.1 50 14,000 / 16,000 0.25
NN 3008 KTN/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN (SP) 40 68 21 42.9 56 13,000 / 15,000 0.3
NN 3009 KTN/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN (SP) 45 75 23 50.1 65.5 12,000 / 14,000 0.38
NN 3010 KTN/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN (SP) 50 80 23 52.8 73.5 11,000 / 13,000 0.42
NN 3012 KTN/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN (SP) 60 95 26 73.7 106 9,500 / 11,000 0.66
NN 3014 KTN/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN (SP) 70 110 30 96.8 150 8,000 / 9,000 1
NN 3016 KTN/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN (SP) 80 125 34 119 186 7,000 / 8,000 1.5
NN 3018 KTN9/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN9 (SP) 90 140 37 138 216 6,300 / 7,000 1.95
NN 3020 KTN9/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN9 (SP) 100 150 37 151 250 5,600 / 6,300 2.1
NN 3026 KTN9/SP 2-row cyl. roller, 1:12 tapered bore · PA66 Cage TN9 (SP) 130 200 52 292 500 4,300 / 4,800 5.55
N 1008 KPHA/SP 1-row cyl. roller, 1:12 tapered bore · PEEK PHA · Steel (SP) 40 68 15 23.3 25 30,000 / 36,000 0.19
N 1008 KPHA/HC5SP 1-row cyl. roller, 1:12 tapered bore · PEEK PHA · Rollers Si3N4 HC5 (SP) 40 68 15 23.3 25 32,000 / 38,000 0.17
N 1010 KPHA/SP 1-row cyl. roller, 1:12 tapered bore · PEEK PHA · Steel (SP) 50 80 16 28.6 33.5 26,000 / 30,000 0.26
N 1010 KPHA/HC5SP 1-row cyl. roller, 1:12 tapered bore · PEEK PHA · Rollers Si3N4 HC5 (SP) 50 80 16 28.6 33.5 28,000 / 32,000 0.22
N 1012 KPHA/SP 1-row cyl. roller, 1:12 tapered bore · PEEK PHA · Steel (SP) 60 95 18 40.2 49 20,000 / 26,000 0.4
N 1012 KTNHA/HC5SP 1-row cyl. roller, 1:12 tapered bore · PA46 TNHA · Rollers Si3N4 HC5 (SP) 60 95 18 41.3 51 18,000 / 24,000 0.37
N 1014 KPHA/SP 1-row cyl. roller, 1:12 tapered bore · PEEK PHA · Steel (SP) 70 110 20 53.9 69.5 18,000 / 22,000 0.61
N 1016 KPHA/HC5SP 1-row cyl. roller, 1:12 tapered bore · PEEK PHA · Rollers Si3N4 HC5 (SP) 80 125 22 66 86.5 18,000 / 20,000 0.73
N 1020 KTNHA/HC5SP 1-row cyl. roller, 1:12 tapered bore · PA46 TNHA · Rollers Si3N4 HC5 (SP) 100 150 24 85.8 120 11,000 / 15,000 1.15
NNU 4920 BK/SPW33 2-row cyl. roller ISO 49, 1:12 tapered · W33 Groove (SP) 100 140 40 128 255 5,600 / 6,300 1.9
NNU 4921 BK/SPW33 2-row cyl. roller ISO 49, 1:12 tapered · W33 Groove (SP) 105 145 40 130 260 5,300 / 6,000 2
NNU 4922 BK/SPW33 2-row cyl. roller ISO 49, 1:12 tapered · W33 Groove (SP) 110 150 40 132 270 5,300 / 6,000 2.05
NNU 4924 BK/SPW33 2-row cyl. roller ISO 49, 1:12 tapered · W33 Groove (SP) 120 165 45 176 340 4,800 / 5,300 2.8

SKF Super-Precision Quick Part Number Index (107 Codes)

Click any code to filter the table

Every designation below maps 1:1 to a row in the dimension table above: green chips denote silicon nitride Si3N4 ceramic hybrid executions (/HC, /HC5), while yellow chips mark spindle cylindrical roller bearings (NN 30, N 10, NNU 49). Contact our technical desk for special matched sets (DB, DF, DT, TBT, QBC) or sealed S719 / S70 units not listed in the chart.

Series 719 (ISO 19 — High-Speed Thin Section) (32 codes) Angular contact ball d = 10 ÷ 150 mm · CD, ACD, CE, ACE, CB, ACB (/HC)
71900 ACE/P4A 71900 CE/HCP4A 71901 CD/P4A 71901 ACD/P4A 71902 CD/P4A 71902 CE/HCP4A 71903 ACD/P4A 71903 ACE/HCP4A 71904 CD/P4A 71904 ACD/P4A 71904 CE/HCP4A 71905 CD/P4A 71905 ACD/P4A 71906 CD/P4A 71906 CE/HCP4A 71906 ACE/P4A 71908 CD/P4A 71908 ACD/P4A 71908 CE/HCP4A 71910 CD/P4A 71910 ACD/P4A 71910 CE/HCP4A 71912 CB/P4A 71914 CD/P4A 71914 ACD/P4A 71914 CE/HCP4A 71916 CD/P4A 71916 ACD/HCP4A 71922 CE/HCP4A 71924 ACB/P4A 71930 CD/P4A 71930 ACD/HCP4A
Series 70 (ISO 10 — Standard CNC Spindles) (25 codes) Angular contact ball d = 15 ÷ 140 mm · CD, ACD, CE, ACE, CB, ACB (/HC)
7002 CE/P4A 7002 CE/HCP4A 7002 ACE/P4A 7003 CD/P4A 7003 ACD/P4A 7004 CD/P4A 7004 ACD/P4A 7004 CE/HCP4A 7005 CD/P4A 7005 ACD/P4A 7006 CD/P4A 7006 ACD/P4A 7006 CE/HCP4A 7007 CD/P4A 7007 ACD/P4A 7008 CE/HCP4A 7008 ACE/P4A 7009 CB/P4A 7013 CD/P4A 7013 ACD/P4A 7014 CD/P4A 7014 CE/HCP4A 7016 ACB/HCP4A 7021 ACD/P4A 7028 CD/P4A
Series 718 (ISO 18 — Ultra-Thin) (15 codes) Angular contact ball d = 10 ÷ 100 mm · CD/P4, ACD/P4, CD/HCP4, ACD/HCP4
71800 CD/P4 71800 ACD/HCP4 71802 CD/P4 71804 CD/P4 71804 ACD/HCP4 71806 CD/P4 71806 ACD/P4 71808 CD/P4 71808 ACD/HCP4 71810 CD/P4 71812 CD/HCP4 71814 CD/P4 71816 ACD/HCP4 71820 CD/P4 71820 ACD/HCP4
Series 72 (ISO 02 — High-Capacity Medium) (10 codes) Angular contact ball d = 20 ÷ 105 mm · CD/P4A, ACD/P4A, CD/HCP4A, ACD/HCP4A
7204 CD/P4A 7204 ACD/HCP4A 7205 CD/P4A 7205 ACD/P4A 7206 CD/P4A 7206 ACD/HCP4A 7213 CD/P4A 7213 ACD/P4A 7221 CD/P4A 7221 ACD/HCP4A
Super-Precision Cylindrical Rollers (NN 30 · N 10 · NNU 49) (25 codes) 1:12 Tapered Bore (K) · PHA / TNHA / TN / TN9 Cages · Steel SP & Hybrid HC5SP
NN 3005 K/SP NN 3006 KTN/SP NN 3007 K/SP NN 3008 KTN/SP NN 3009 KTN/SP NN 3010 KTN/SP NN 3012 KTN/SP NN 3014 KTN/SP NN 3016 KTN/SP NN 3018 KTN9/SP NN 3020 KTN9/SP NN 3026 KTN9/SP N 1008 KPHA/SP N 1008 KPHA/HC5SP N 1010 KPHA/SP N 1010 KPHA/HC5SP N 1012 KPHA/SP N 1012 KTNHA/HC5SP N 1014 KPHA/SP N 1016 KPHA/HC5SP N 1020 KTNHA/HC5SP NNU 4920 BK/SPW33 NNU 4921 BK/SPW33 NNU 4922 BK/SPW33 NNU 4924 BK/SPW33

Need a quote or engineering assistance on SKF CNC spindle bearings?

Cantoni Cuscinetti is an Authorized SKF Super-Precision Distributor with technical inventory in Brescia, Italy. Send us the full bearing code or spindle specs for immediate checks on preloads, matched sets, and delivery lead times.

Request Availability & Quote